Fix the black dotted area on your car windows.

TintGel™ - Dot Matrix fix

(4.3/5) Based on 259 unique ratings.

Article picture:

299 SEK

Partno: dot-matrix-tintgel-100ml

Stock status: Made To Order

Wishlist

Description

(4.3/5) Based on 259 unique ratings.

TINTGEL™ · DOT MATRIX FIX · WATER-SOLUBLE

TintGel™ creates a smoother result on the automotive glass dot matrix

TintGel™ fills the black dotted area on automotive glass and helps the window film lie more evenly against the glass. The result is a smoother, more transparent surface without the white air gap that can otherwise appear around the dot matrix.

View installation guide View the TintGel™ brand

Quick facts

Use:
Dot matrix and the outer edges of the window film

Compatibility:
All types and brands of window film

Application:
Thin layer applied with a bristle or foam brush

Drying time:
Approximately 15 minutes before installation

Temperature:
Apply at a minimum of +15 °C

Cleaning:
Dissolves with lukewarm water and a cloth

A smoother dot matrix

Fills the spaces between the raised dots on the glass and reduces the visible white air gap.

Helps prevent edge lift

Forms a transparent bond that helps keep the film in place along edges and corners.

For multiple film types

Suitable for removable window film and professional adhesive window film, regardless of brand.

Easy to wash off

The water-soluble gel can be removed with lukewarm water and a soft cloth.

HOW TINTGEL™ WORKS

Three simple stages for a smoother finish

TintGel™ is applied to clean, dry glass before the window film. The installation solution softens and activates the gel, which then sets together with the film.

STAGE 1

Apply a thin layer

Spread TintGel™ evenly over the entire dot matrix area using a brush.

STAGE 2

Allow the gel to dry

Wait approximately 15 minutes before spraying the installation solution and positioning the window film.

STAGE 3

Install using lighter pressure

Use overlapping strokes and reduce the pressure when the squeegee reaches the dot matrix area.

NO MORE EDGE LIFT

Helps keep edges and corners in place

Window film can lift at edges and corners due to the installation or because the dot matrix dots are thick and dense. TintGel™ fills the uneven areas and acts as a transparent bond between the glass and the window film.

On removable window film, TintGel™ can also be applied along the outer edges before installation to provide extra hold.

CLEAN AND PRACTICAL FORMULA

Odourless and water-soluble

TintGel™ is odourless, water-soluble and contains no hazardous chemicals. If the gel is applied incorrectly or needs to be removed, it can be dissolved with lukewarm water and a cloth, even after it has been dry for a long time.

Please note: Brush not included. Use a small bristle or foam brush to apply a thin, even layer.

INSTALLATION GUIDE

Apply TintGel™ step by step

Follow every step and allow sufficient drying time. Thorough cleaning and a thin, even layer provide the best conditions for a clean result.

1. Avoid direct sunlight
Do not apply TintGel™ while the glass is in direct sunlight.

2. Check the temperature
The temperature must be at least +15 °C during application.

3. Clean the glass thoroughly
Clean the entire glass and pay particular attention to the dot matrix area.

4. Allow the glass to dry
Wait until the entire glass, especially the dot matrix area, is completely dry.

Omdöme

(4.3/5) Based on 259 unique ratings.

Rating (1)

Finally a good product for DOT Matrix when tinting windows!

Have been looking for a good solution for DOT Matrix. Tried TintGel on the raster edges and the result was perfect! Will have it on all cars I tint in the future! Fast delivery to the UK was another plus! Will order again / Oliver - UK

O. Davis

2022-02-06 15:05:08

Select region and language

TintGel™ - Dot Matrix fix 100ML

Description

TintGel™ creates a smoother result on the automotive glass dot matrix

Three simple stages for a smoother finish

Helps keep edges and corners in place

Odourless and water-soluble

Apply TintGel™ step by step

Omdöme

Description

TintGel™ creates a smoother result on the automotive glass dot matrix

Three simple stages for a smoother finish

Helps keep edges and corners in place

Odourless and water-soluble

Apply TintGel™ step by step

Omdöme

SV - DA - NO - EN - DE - FI FR - ES
	Sverige	SV	SV	SV	EN
	Danmark	SV	SV	DA	EN
	Norge	SV	SV	NO	EN
	Suomi	SV	FI	SV	EN
	Åland	SV	SV	FI	EN
	Deutschland	SV	SV	DE	EN
	UK	SV	SV	PL	EN
	France	SV	SV	FR	EN
	España	SV	SV	ES	EN
	Polska	SV	SV	PL	EN
	Belgique	SV	FR	DE	EN
	Nederland	SV	SV	NL	EN
	Italy	SV	SV	LT	EN
	Austria	SV	SV	LT	EN
	Portugal	SV	SV	LT	EN
	Greece	SV	SV	LT	EN
	Greece	SV	SV	LT	EN
	Eesti	SV	SV	EE	EN
	Latvija	SV	SV	LV	EN
	Lietuva	SV	SV	LT	EN
	Luxenburg	SV	SV	LT	EN
	Bulgaria	SV	SV	LT	EN
	Hungary	SV	SV	LT	EN
	Croatia	SV	SV	LT	EN
	Cyprus	SV	SV	LT	EN
	Malta	SV	SV	LT	EN
	Romania	SV	SV	LT	EN
	Slovenia	SV	SV	LT	EN
	Czech Republic	SV	SV	LT	EN
	USA	SV	SV	LT	EN

SV \| DA \| NO \| EN \| DE \| FI \| FR \| ES
	Sverige	SV	SV	SV	EN
	Danmark	SV	SV	DA	EN
	Norge	SV	SV	NO	EN
	Finland	SV	FI	SV	EN
	Åland	SV	SV	FI	EN
	Tyskland	SV	SV	DE	EN
	Polen	SV	SV	PL	EN
	Frankrike	SV	SV	FR	EN
	Spanien	SV	SV	ES	EN
	Belgien	SV	SV	BE	EN
	Nederländerna	SV	SV	NL	EN
	Letland	SV	SV	LV	EN
	UK	SV	SV	PL	EN